|
HBS is an Indian
Manufacturer's Authorized Organization dealing in Products covering wide range of
Production equipment like Temperature controlled Soldering & De-Soldering Stations
for PTH , SMD and BGA / uBGA, CSPs and Flipchips Work stations, Device Programmers
like E/EPROM’s,PALs, GALs, EPLDs, FPGA and Micro Controller programmers
|
|
Over View
|
Features & Specification
| Actual
Device List
|
|
Product
: BeeProg+ |
|
|
 |
|
Universal
Programmers - BeeProg+
Extremely fast universal USB/LPT interfaced programmer.
Features :
- Next generation of USB/LPT-compatible, Windows 98/ME/NT/2000/XP/2003/XPx64/Vista
based ELNEC universal programmers, built to meet the strong demand of the
small manufacturing and developers community for the fast and reliable universal
programmer.
- Supports all kinds of types and silicon technologies of today and tomorrow
programmable devices without family-specific module. You have freedom to
choose the optimal device for your design.
Using built-in in-circuit serial programming
(ISP) connector, the programmer is able to program ISP capable chips in circuit.
- BeeProg+ isn't only a programmer, but also a tester of TTL/CMOS logic ICs
and memories. Furthermore, it allows generation of user-definable test pattern sequences.
- Provides very competitive price coupled with excellent hardware design for reliable
programming. Probably best "value for money"programmer in this class.
- Very fast programming due to high-speed FPGA driven hardware and execution
of time-critical routines inside of the programmer. At least fast than competitors
in this category, for many chips much faster than most competitors. As a result,
when used in production this one-socket-programmer waits for an operator, and not
the other way round.
- BeeProg+ interfaces with the IBM PC compatible or higher, portable or desktop personal
computers through USB (2.0/1.1) port or any standard parallel (printer) port.
Programmer can utilize power of both USB high-speed port and IEEE1284 (ECP/EPP)
high-speed parallel port. Support of both USB/LPT port connection gives you the
choice to connect the BeeProg+ programmer to any PC, from latest notebook to older
desktop without USB port.
Specifications:
Base unit, DACs
ZIF socket, pindriver
ISP connector
- 20-pin male type with missinsertion lock
- 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from
1.8V up to 5V to handle all (low-voltage including) devices.
- 1x VCCP voltage (range 2V..7V/100mA), can be applied to two pins
- programmed chip voltage (VCCP) with both source/sink capability and voltage sense
- 1x VPP voltage (range 2V..25V/50mA), can be applied to six pins
- target system supply voltage (range 2V..6V/250mA)
- ESD protection on each pin of ISP connector (IEC1000-4-2: 15kV air, 8kV contact)
- two output signals, which indicate state of work result = LED OK and LED Error (active
level: min 1.8V)
- input signal, switch YES! equivalent (active level: max 0.8V)
|
|
|
|
|
|
|
|
|
|
|
|
