Records frequency employing a high-performance digital Synthesizer method

Measures wide frequency : 9 kHz ~ 3.0 GHz

Superior Resolution : Minimum 1 Hz

Compact and lightweight package

Pre Amp as standard

Wide Input Dynamic Range : -130 dBm ~ 20 dBm

Easy and simple Key Buttons

CDMA measurement functions : ACPR, ACLR, OBW, Channel Power

Resolution Bandwith(RBW) : 1 kHz ~ 3 MHz(1-3 Step), 9 kHz, 120 kHz

Simple usage and convenience 8 Markers, Trace function, Trigger function

Supports various types of convenient interface

GPIB(option), RS-232C(option), Printer(supports nearly all types of Printer)

REF in, REF out functions

Large capacity internal memory for storing measured data

Stores measured data up to 900 events

Stores Setup data up to 3,000 events

USB Host Port

Supports USB Printer

Stores data and applied Image file(GIF) into USB Flash memory

Ethernet Port and Software(option) for Internet remote control

FREQUENCY

Range

9kHz to 3.0GHz (AT6060D : 9kHz to 6.0GHz )

 Resolution

Minimum 1Hz

Span Range

100 Hz/div to 300 MHz/div
Selection of 1, 2, 5 steps(automatic), ZERO Span, FULL Span (9KHz to 3.0GHz)

Frequency Selection

Start, Stop, Center, Span setup

pan Accuracy

±3% of the Indicated Span Width

Readout Accuracy

≤±(Indicated frequency × Reference frequency accuracy ＋ Span
× Span accuracy ＋ 50% of RBW)

Phase Noise

≤-100dBc/Hz (@ 10kHz offset)

AMPLITUDE

Range

+20 dBm ~ -105 dBm, +20 dBm ~ -130 dBm(Pre Amp ON)

Average Noise Level (1kHz RBW, 10Hz VBW)

≤-105 dBm150 kHz ~ 2.7 GHz
≤-127 dBm(Pre Amp On) 20 MHz ~ 2.7 GHz
≤-100 dBm, -123 dBm(Pre Amp On) 2.7 GHz ~ 3 GHz
≤-130dBm(Pre Amp On) ; Typically

Amplitude Unit

dBm, dBmV, dB㎶, V, mV, ㎶, W, mW, uW

Display Scale linearity

≤ ±1.5 dB / 70 dB (10dB / div), ≤ ±1.5dB / 40dB (5dB / div)
≤ ±0.5 dB / 8 dB (1dB / div), ≤ ±0.5dB / 16dB (2dB / div)

Frequency Response (0 dB attenuation)

-3.5 ~ 1.5 dB (100kHz ~ 10MHz)
±1.5 dB (10MHz ~ 3GHz)

Reference Level

Range

-90 dBm to +20 dBm

Resolution

0.1 dB steps

Accuracy :

± 1.5 dB

Second Harmonic Distortion

 ≤-60 dBc, -40 dBm input

Inter-modulation Distortion

≤-70 dBc, -40 dBm input

Residual Spurious

≤-85 dBm (Input terminated, 0 dB attenuation)

Other Input Spurious

≤-60 dBc, -30 dBm input

Resolution Bandwidth

Selections

1kHz, 3kHz, 10kHz, 30kHz, 100kHz, 300kHz, 1MHz, 3MHz, 9kHz, 120kHz

Accuracy

≤ ±20%

Selectivity

60 dB / 3 dB ratio < 15 : 1
60 dB / 6 dB ratio < 12 : 1 (9 kHz, 120 kHz)

Switching Error

≤ ± 1.0 dB (1kHz Reference RBW)

Video Bandwidth

 10 Hz to 3 MHz in 1-3-10 step

SWEEP

Rate

100 ms to 1000 sec，40ms to 1000sec(zero span)

Accuracy

≤ ±20%

Trigger Source

External(rear), Video, Free Run, Line

Trigger Modes

continuous, single

Trigger Level

TTL level

STORAGE

Trace Storage

maximum 900 waveforms

Setup Storage

maximum 3,000 states

SCREEN DISPLAY

Type

6.4" color TFT LCD

Display Resolution

640(H) x 480(V) active display area

Marker Modes

Peak search, Delta marker, Marker to Center, Marker to Reference (8 markers maximum)

INPUT

RF Input Connector

N-type Female, 50 ohm nominal

VSWR

150 kHz to 3.0 GHz, VSWR < 1.5 : 1(with 0 dBm Reference Level)

Maximum input level

0 Vdc, +20 dBm

STANDARD FREQUENCY (10MHZ, REF.)

± 0.5 ppm

± 0.5 ppm / Year

BNC female

-5 dBm to +15 dBm

10 MHz, +8 dBm nominal

INTERFACE

Communication Port

RS-232C

Printer Driver

PCL Command, HP, EPSON,SAMSUNG,CANON Laser-Jet, Desk-Jet

Connector

for standard 25 pin female D-Sub parallel printer, supports USB

USB Host Printer Driver

PCL Command, HP, EPSON, SAMSUNG CANON Laser-Jet, Desk-Jet

USB Storage Device

Supports 1.1 and 2.0, for storing image file, supports GIF format

Ethernet(Option)

10-Base-T Ethernet, Supports internet remote control

GPIB Interface(Option)

IEEE488 bus

GENERAL SPECIFICATIONS

STORAGE TEMPERATURE:-20 ℃ TO 70 ℃
RF EMISSIONS : EN 55011, FCC PART15 SECTION 15.101
RF IMMUNITY : EN 61326

SYSTEM SIZE : 350(W) X 195(H) X 370(D)MM
SYSTEM WEIGHT : 10KG
INPUT VOLTAGE : 100~240 VAC AT 50/60HZ

OPERATING TEMPERATURE : 0 ℃ TO 40 ℃